B5S with 501 Sunset (not available in 10' or 14' widths)
Residential Garage Doors
The B4/B5 Series Doors are available in Short Panel, Long Panel, (B4 is available in Flush Panel) designs, white, brown, almond and sandstone colors. If you would like to add insulation or windows those options are available.
The B5 door is made of 25 gauge steel, the B4 is 24 gauge steel for long lasting performance. They have finger protection joint with weather seal to help prevent accidents, air and water infiltration. The bottom of the doors have a rust free aluminum retainer with a vinyl weatherseal that helps seal some mild irregular floors.
The paint is a baked on enamel and has a limited 10 yr. warrantee. The springs are a corrosion resistant galvanized metal for 50% longer life, and provides a more attractive appearance.
Warranty Information:
They have a limited warranty of 20 years on the paint system, 5 years on the hardware and 3 years on the galvanized tortion springs.
Finger protection joint with weatherstop seal:
Patented joint design and seal help prevent fingers from getting pinched, and protect against air and water infiltration.
Patented Safe-T-Bracket®This specially designed bottom bracket helps prevent serious injury that could occur if the bottom bracket were removed while the door is closed and under tension.
Paint System The ideal paint system starts with a hot dipped galvanized steel surface which is then coated on both sides with a baked on primer and topped with a baked on enamel top coat. Available in brown, Almond, White and Sandstone. The surface may be repainted with a high quality latex paint to compliment your homes trim.
Galvanized SpringsDurable, corrosion-resistant galvanized torsion springs last 50% longer than industry standard springs and offer a more attractive, polished appearance.
There are several window options to choose from. A few are shown below:
607 Cathedral Long Panel
508 Charleston Short Panel
509 Colonial Short Panel
Small Plain
503 Sunset Short Panel
501 Sunset Short Panel
610 Ranch Prairie Long Panel
Classic Long Panel
Classic Short Panel
Flush Panel
Listed below are a few measurements that are helpful when looking at garage doors. The standard door you need 12" between the top of the opening and the ceiling, and at least 6" on each side of the door. If you do not have this room then there are Lo-Headroom options available to make your new door work.